Rust Preventive Oils

Axxanol 33

Zerust Axxanol 33 is a Oil based rust preventive coating with oily surface finish.



Protects metal during shipment, storage and WIP. Protects during in line rolling mill applications, cold rolled sheet and coils, wire bar, and cast & machined ferrous and non-ferrous metals..
Axxanol 33CD

Zerust Axxanol 33CD is a solvent-based rust preventive coating that dries to the touch; eliminating oily

 surfaces that can attract dust and contaminants. This coating protects up to three months under shelter or can be used with VCI packaging for long-term protection.



Protects metal during shipment, storage and WIP. Protects during in line rolling mill applications, cold rolled sheet and coils, wire bar, and cast & machined ferrous and non-ferrous metals.
Axxanol 34CD

Zerust Axxanol 34CD is a solvent-based rust preventive coating that leaves a very light, oily film on the

protected surface. It provides powerful corrosion protection against aggressive environments such as salt air and high temperatures for multiple metal types.



Protects metal during shipment, storage and WIP. Protects during in line rolling mill applications, cold rolled sheet and coils, wire bar, and cast & machined ferrous and non-ferrous metals.
Axxanol Spray-G

For superior corrosion protection in a sprayable grease, use Zerust Axxanol Spray-G. It protects in extreme 

conditions, such as outdoor storage and overseas shipping.



Protects metal during shipment, storage and WIP. Protects during in line rolling mill applications, cold rolled sheet and coils, wire bar, and cast & machined ferrous and non-ferrous metals..
Wax Base Ze-VERP 1WX

Ze-VERP 1WX is a low viscosity rust preventive for ferrous metals used in work-in-progress (WIP) and in-plant/domestic in-transit corrosion 

protection against harsh environments (salt air, high temperatures, etc.). On the metal surface, it leaves a thin dry layer.

Wax Base Ze-VERP 2WX

Ze-VERP 2WX is a low viscosity rust preventive for ferrous metals used in work-in-progress (WIP) and in-plant/domestic in-transit corrosion 

protection against harsh environments (salt air, high temperatures, etc.). It leaves a non-sticky, readily removed thin waxy coat on metal surfaces.

AxxaVis HST - 10

Use Zerust®/Excor® AxxaVis” HST-10 to treat water and deactivate chlorides. Add product to water to make it suitable for

 hydrostatic test processes conducted on pressure vessels such as pipes, heat exchangers, storage tanks and ship voids.



Deactivates ionic contaminants • Facilitates use of hard water • Prevents rust and scale
Axxatec 80C+

Water base RP
• Easy to use
• Dry to touch
• Protects Iron Steel, Brass, 

Aluminum, Copper and Zinc
• Protection period: six months under shelter



Safe for use on painted surfaces, rubber seals, and plastics. • Can be easily removed by using any commercially available alkaline cleaner or solvent

VCI Film (Volatile Corrosion Inhibitor)

VCI Ferrous

Zerust®/Excor VCI Ferrous Film provides cost-effective and versatile protection corrosion damage

 against corrosion damage for ferrous metals in shipping and storage. It protects steel, iron, cast iron and its alloys. It is available in various sized rolls, sheets, tubing and bags.



Applicable for: Ferrous metals such as Iron, steel and cast iron etc. Simply insert into, wrap or cover the metal component with the film. The film can be secured with tape,  heat-sealed, stapled, secured with a tie or with a rubber band.
VCI Multi-metal

Zerust®/Excor® VCI Multimetal Film provides cost-effective and versatile protection against corrosion 

damage for ferrous and non-ferrous metals in shipping and storage. It is available in various sized rolls, sheets, tubing and bags.



Applicable for: Components with combination of Fe and non-Fe metals. Simply insert into, wrap or cover the metal component with the film. The film can be secured with tape, heat-sealed, stapled, secured with a tie or with a rubber band.
VCI Non-ferrous Film

Zerust®/Excor® VCI Non-ferrous Film provides cost effective and versatile protection against 

 for non-ferrous metals such as aluminum, copper, brass, bronze and galvanized steel in shipping and storage.

Applicable for: Non-Ferrous metals such as Aluminum, Copper, Zinc etc.

Simply insert into, wrap or cover the metal component with the film.The film can be secured with tape,heat-sealed, stapled, secured with a tie or with a rubber band.

VCI Bags

Zerust® Multimetal Bag and Shroud Film is a special packaging film containing proprietary Zerust®

 corrosion inhibiting additives developed to prevent the corrosion of ferrous and non-ferrous metals.

Applicable for: Non-Ferrous metals such as Aluminum, Copper, Zinc etc.

Simply insert into, wrap or cover the metal component with the film.The film can be secured with tape,heat-sealed, stapled, secured with a tie or with a rubber band.

DURASILVER

The Zerust acid-gas scavengers in DURASILVER Anti-Tarnish bags prevent acid gases from entering the 

packing, safeguarding your silverware from oxidation and tarnish.

Applicable for: Components with combination of Fe and non-Fe metals.

Simply insert into, wrap or cover the
metal component with the film. The film can be secured with tape, heat-sealed, stapled, secured with a tie or with a rubber band.

VCI Paper (Volatile Corrosion Inhibitor)

VCI Paper

Environment friendly, non-toxic, odorless and non allergic Acid free/pH neutral
Variants: Sheets, and rolls .
Protection period: 2 years



Applicable for: Components with combination of Fe and non-Fe metals Pack only clean and dry parts Wear gloves to avoid leaving acidic or corrosion causing fingerprints Make sure that enclosure is sealed in order to restrict air flow.
VCI poly laminated Paper

Environment friendly, non-toxic, odorless and non allergic Acid free/pH neutral
Variants: Sheets, and rolls .
Protection period: 2 years



Applicable for: Components with combination of Fe and non-Fe metals Pack only clean and dry parts Wear gloves to avoid leaving acidic or corrosion causing fingerprints Make sure that enclosure is sealed in order to restrict air flow.
Scrim with VCI paper

Environment friendly, non-toxic, odorless and non allergic Acid free/pH neutral
Variants: Sheets, and rolls .
Protection period: 2 years



Applicable for: Components with combination of Fe and non-Fe metals Pack only clean and dry parts Wear gloves to avoid leaving acidic or corrosion causing fingerprints Make sure that enclosure is sealed in order to restrict air flow.

Rust Removers

Axxaclean 2048

Zerust® Axxaclean™ 2048 is a fast-acting and non hazardous* rust and tarnish remover. It rapidly removes light to medium corrosion even in cracks and crevices. Cleaned surfaces are free of black-carbon residue and resistant to flash-corrosion.



Works on ferrous metals (Iron, cast iron, Iron steel) brass & copper Does not leave stain or black carbon residue
Axxaclean 3048

Zerust® Axxaclean™ 3048 is a fast-acting rust and tarnish remover. It rapidly removes medium to heavy corrosion even in cracks and crevices. Cleaned surfaces are free of black-carbon residue and resistant to flash-corrosion.



Works on ferrous metals (Iron, cast iron, Iron steel) brass & copper Does not leave stain or black carbon residue

Vapor Diffusers/Capsules

VCI Capsules

Zerust®/Excor® Vapor Capsules are portable capsules that contain patented Zerust VCI technology. Use to protect metals in hard to reach areas of control panels, electrical cabinets and other enclosed spaces, even when they are in operation. Or use as a supplement to other Zerust VCI packaging products for added protection.



Metals protected: Ferrous and non Ferrous
ActivPak

It work in minutes to prevent flash corrosion on
bare metal surfaces in an
enclosed space.
Protection period: 1 yr
Manufacturing location: Traded



Metals protected: Ferrous and non Ferrous

Washing Solutions

Axxawash IMMW Washing Solution

Zerust AXXAWASH IMMW is a neutralizing,aqueous,low alkaline,low foaming,Ferrous and Aluminium cleaner ccontsining biodegradable sufactants and corrosion inhibitors.

Features

  • Provides Neutralizing Wash
  • Excellent de-emulsibility
  • Streak-Free and low odor
  • Removes soluble and particulate metalworking soils
  • Provides excellent gloss to the component

Metal Working Fluids (MMF)

HarKool - M50

HARKOOL – M50 is Nitrites free high-performing coolant designed to reduce coolant consumption, pro long system life and meet your machining 

needs when working with a wide range of materials like aluminium, cast iron or other ferrous alloys.

HarKool SS

HarKool SS is a moderate duty, semi-synthetic water soluble cutting & grinding fluid. It will increase blade, tool, or wheel life. It is developed 

with low foaming Emulsifiers & surfactants which offers superior performance while assuring environmental and worker safety. It provides longer sump life due to low oil content.

HarKool S-100

This unique Synthetic technology offers superior performance while assuring environmental and worker safety. The interaction and synergy of this 

chemistry creates superior lubricity, heat dissipation (cooling), cleaning action, corrosion and microbial life protection. The combination of these features provides benefits such as improved productivity, tool life, surface finishes and sump/system life.

Maintenance & Repair

AxRUST4

AxRUST4™  is an EXCELLENT MRO (Maintenance Repair Overhaul) product in terms of quality, reliability, and adaptability for a wide range of industrial, automotive, and household applications.

Availability

  • 125 ml
  •  500 ml

Benefits

  • Automotive
  • Domestic
  • Industrial & Heavy Machinery
Open chat
Need help?
Hello, How can we help you?